Leone

Leone/
├── implant
│   ├── Leone_XCN_fda
│   │   ├── CAD-CAM_MUA_D2.2.sdfa
│   │   ├── CAD-CAM_MUA_D2.2.sdfa.partInfo
│   │   ├── CAD-CAM_MUA_D3.0.sdfa
│   │   ├── CAD-CAM_MUA_D3.0.sdfa.partInfo
│   │   ├── config.xml
│   │   ├── Connection_Geometry_Cad_Cam_Interface_MUA_D2.2.sdfa
│   │   ├── Connection_Geometry_Cad_Cam_Interface_MUA_D3.0.sdfa
│   │   ├── Connection_Geometry_MUA_D2.2.sdfa
│   │   ├── Connection_Geometry_MUA_D3.0.sdfa
│   │   ├── Connection_Geometry_Ti-Base_ExaConnect.sdfa
│   │   ├── LE_Leone.png
│   │   ├── Min_Thicknes_Ti-Base_Exaconnect.sdfa
│   │   ├── Min_Thickness_MUA_Cad_Cam_D2.2.sdfa
│   │   ├── Min_Thickness_MUA_Cad_Cam_D3.0.sdfa
│   │   ├── Min_Thickness_MUA_D2.2.sdfa
│   │   ├── Min_Thickness_MUA_D3.0.sdfa
│   │   ├── MUA_LabAnaLog_D2.2.sdfa
│   │   ├── MUA_LabAnaLog_D2.2.sdfa.partInfo
│   │   ├── MUA_LabAnaLog_D3.0.sdfa
│   │   ├── MUA_LabAnaLog_D3.0.sdfa.partInfo
│   │   ├── preview.png
│   │   ├── Scan_Abutment_MUA_Inclined_Plane.stl
│   │   ├── Scan_Abutment_MUA_Inclined_Plane.stl.partInfo
│   │   ├── Scan_Abutment_MUA_Inclined_Plane_Long.stl
│   │   ├── Scan_Abutment_MUA_Inclined_Plane_Long.stl.partInfo
│   │   ├── Scan_Abutment_Ti-Base_direct_scan_D3.0_Inclined_Plane.stl
│   │   ├── Scan_Abutment_Ti-Base_direct_scan_D3.0_Inclined_Plane.stl.partInfo
│   │   ├── Scan_Abutment_Ti-Base_direct_scan_D3.0_Pyramid.stl
│   │   ├── Scan_Abutment_Ti-Base_direct_scan_D3.0_Pyramid.stl.partInfo
│   │   ├── Screw_ExaConnect.sdfa
│   │   ├── Screw_MUA.sdfa
│   │   ├── Screw_MUA.sdfa.partInfo
│   │   ├── Screw_MUA_CAD-CAM_interface.sdfa
│   │   ├── Ti-Base_Exaconnect.sdfa
│   │   └── Ti-Base_Exaconnect.sdfa.partInfo
│   └── Leone_XCN_fda_stock
│       ├── config.xml
│       ├── Connection_Geometry_Multitech_D2.2.sdfa
│       ├── Connection_Geometry_Multitech_D2.2_15.sdfa
│       ├── Connection_Geometry_Multitech_D3.0.sdfa
│       ├── Connection_Geometry_Multitech_D3.0_15.sdfa
│       ├── Connection_Geometry_Ti-Base_D2.2.sdfa
│       ├── Connection_Geometry_Ti-Base_D3.0.sdfa
│       ├── LE_Leone.png
│       ├── Min_Thickness_Multitech_D2.2.sdfa
│       ├── Min_Thickness_Multitech_D2.2_15.sdfa
│       ├── Min_Thickness_Multitech_D3.0.sdfa
│       ├── Min_Thickness_Multitech_D3.0_15.sdfa
│       ├── Min_Thickness_Ti-Base_D2.2.sdfa
│       ├── Min_Thickness_Ti-Base_D3.0.sdfa
│       ├── preview.png
│       ├── Scan_Abutment_Multitech_D2.2_Inclined_Plane.stl
│       ├── Scan_Abutment_Multitech_D2.2_Inclined_Plane.stl.partInfo
│       ├── Scan_Abutment_Multitech_D2.2_Pyramid.stl
│       ├── Scan_Abutment_Multitech_D2.2_Pyramid.stl.partInfo
│       ├── Scan_Abutment_Multitech_D3.0_Inclined_Plane.stl
│       ├── Scan_Abutment_Multitech_D3.0_Inclined_Plane.stl.partInfo
│       ├── Scan_Abutment_Multitech_D3.0_Pyramid.stl
│       ├── Scan_Abutment_Multitech_D3.0_Pyramid.stl.partInfo
│       ├── Scan_Abutment_Ti-Base_D2.2_Inclined_Plane.stl
│       ├── Scan_Abutment_Ti-Base_D2.2_Inclined_Plane.stl.partInfo
│       ├── Scan_Abutment_Ti-Base_D2.2_Pyramid.stl
│       ├── Scan_Abutment_Ti-Base_D2.2_Pyramid.stl.partInfo
│       ├── Scan_Abutment_Ti-Base_D3.0_Inclined_Plane.stl
│       ├── Scan_Abutment_Ti-Base_D3.0_Inclined_Plane.stl.partInfo
│       ├── Scan_Abutment_Ti-Base_D3.0_Pyramid.stl
│       ├── Scan_Abutment_Ti-Base_D3.0_Pyramid.stl.partInfo
│       ├── Scan_Abutment_Ti-Base_direct_scan_D2.2_Inclined_Plane.stl
│       ├── Scan_Abutment_Ti-Base_direct_scan_D2.2_Inclined_Plane.stl.partInfo
│       ├── Scan_Abutment_Ti-Base_direct_scan_D2.2_Pyramid.stl
│       ├── Scan_Abutment_Ti-Base_direct_scan_D2.2_Pyramid.stl.partInfo
│       ├── Scan_Abutment_Ti-Base_direct_scan_D3.0_Inclined_Plane.stl
│       ├── Scan_Abutment_Ti-Base_direct_scan_D3.0_Inclined_Plane.stl.partInfo
│       ├── Scan_Abutment_Ti-Base_direct_scan_D3.0_Pyramid.stl
│       ├── Scan_Abutment_Ti-Base_direct_scan_D3.0_Pyramid.stl.partInfo
│       ├── Ti-Base_D2.2.sdfa
│       ├── Ti-Base_D2.2.sdfa.partInfo
│       ├── Ti-Base_D3.0.sdfa
│       ├── Ti-Base_D3.0.sdfa.partInfo
│       ├── Titanium_Base_Multitech_D2.2.sdfa
│       ├── Titanium_Base_Multitech_D2.2.sdfa.partInfo
│       ├── Titanium_Base_Multitech_D2.2_15.sdfa
│       ├── Titanium_Base_Multitech_D2.2_15.sdfa.partInfo
│       ├── Titanium_Base_Multitech_D3.0.sdfa
│       ├── Titanium_Base_Multitech_D3.0.sdfa.partInfo
│       ├── Titanium_Base_Multitech_D3.0_15.sdfa
│       └── Titanium_Base_Multitech_D3.0_15.sdfa.partInfo
└── modelcreator
    └── implants
        └── Leone_XCN_ModelCreator
            ├── config.xml
            ├── Exaconnect_LabAnaLog.sdfa
            ├── Exaconnect_Retention_Mesh.sdfa
            ├── LabAnaLog_D2.2.sdfa
            ├── LabAnaLog_D3.0.sdfa
            ├── MUA_LabAnaLog_D2.2.sdfa
            ├── MUA_LabAnaLog_D3.0.sdfa
            ├── MUA_Retention_Mesh_D2.2.sdfa
            ├── MUA_Retention_Mesh_D3.0.sdfa
            ├── Retention_Mesh_D2.2.sdfa
            └── Retention_Mesh_D3.0.sdfa